|
The Advanced tab contains shell, error log and maintenance functions.
Functions
| • | Scan Network: Scans the local network (subnet) for running real-time targets. |
| • | Shell: Opens a shell to the selected real-time target. |
| • | Errorlog: Shows the continuous error log of the real-time target (using the file /var/log/messages). |
| • | Save Logfile: Copies the error log (/var/log/messages) to your local hard disk. |
| • | Hardware autodetection: Runs the automatic measurement hardware detection mechanism on the real-time target. The detected hardware is shown on the hardware configuration page of the SCALE-RT Webinterface. |
| • | Restart real-time environment: Restart of the real-time environment. |
| • | Restart driver interface: Restart of the driver interface. |
| • | Reboot RT system: Reboot the real-time target. |
| • | Shutdown RT system: Shutdown of the real-time target. |
|
