Execute the following steps to install the SCALE-RT Cross Compiler:
| 1. | Run the setup executable (SCALE-RT_Cross_Compiler_Setup.exe). |
| 2. | The screen below appears. |
3. Click 'Next'. The End-User License Agreement will be shown as in the following screen. If you agree with the EULA click 'Yes' to continue with the installation or 'No' to abort the installation.
4. If you have accepted the license agreement the customer information dialog will be shown. Please enter your name and the name of your company.
.png)
5. In the next dialog the installation type can be selected. Complete will install all components. Custom enables the component selection dialog. Click 'next' to continue.
6. Select a destination for the Cygwin and the CrossCompiler environment and click 'Next' to continue.
7. Select the components to install and click 'Next' as shown in the following screen:
8. SCALE-RT CrossCompiler installer is ready to start the installation. Click 'Install' to continue.
9. The Cygwin environment will be installed by the original Cygwin Setup as shown in the following screen:
10. Congratulations! You have successfully installed the SCALE-RT CrossCompiler. Click 'Finish' to finalize the installation.
